BRAKE ACTUATOR (w/ VSC) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. DRAIN BRAKE FLUID |
| 3. REMOVE BRAKE ACTUATOR ASSEMBLY |
![]() |
Use tags or mark a note to identify the reconnection locations.
![]() |
Release the latch of the actuator connector and disconnect the connector.
Using a union nut wrench, disconnect the 6 brake lines from the actuator.
![]() |
Remove the 2 bolts, nut and actuator with bracket.
| 4. REMOVE NO. 3 BRAKE ACTUATOR BRACKET |
![]() |
Remove the bolt and No. 3 brake actuator bracket.