BRAKE MASTER CYLINDER (for TSAM Made) > REMOVAL |
| 1. DRAIN BRAKE FLUID |
| 2. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY |
![]() |
for Manual Transmission:
Disconnect the clutch reservoir tube labeled A from the master cylinder.
Disconnect the brake fluid level warning switch connector labeled B.
Using a union nut wrench, disconnect the 5 brake lines labeled C from the master cylinder and 3-way.
![]() |
Remove the 2 nuts and bracket (with 3-way).
Pull out the master cylinder from the brake booster.
Remove the O-ring from the master cylinder.