Home › BRAKE › BRAKE › LOAD SENSING PROPORTIONING VALVE (w/ VSC)

LOAD SENSING PROPORTIONING VALVE (w/ VSC) > REMOVAL

for Preparation Click here



1. DRAIN BRAKE FLUID

NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.



2. REMOVE BLEND PROPORTIONING VALVE ASSEMBLY WITH BRACKET


    C239742
  1. Using a union nut wrench, disconnect the brake lines at the 4 points indicated by the arrows in the illustration.



    C239743
  1. Remove the 3 bolts and blend proportioning valve assembly with bracket.



3. REMOVE BLEND PROPORTIONING VALVE ASSEMBLY


    C239744
  1. Remove the 2 bolts and 2 valves from the bracket.