Home › TRANSMISSION ยท A340E AUTOMATIC TRANSMISSION › PARK / NEUTRAL POSITION SWITCH

PARK / NEUTRAL POSITION SWITCH > REMOVAL

for Preparation Click here



1. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


C104746E06
  1. Disconnect the switch connector.

  1. Using a screwdriver, pry out the lock washer.

  1. Remove the lock nut and lock washer.

  1. Remove the bolt and park/neutral position switch.
    Text in Illustration 
    *1
    Lock Washer
    *2
    Lock Nut

    HINT:
    Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.