Home › TRANSMISSION ยท A343E AUTOMATIC TRANSMISSION › FLOOR SHIFT ASSEMBLY

FLOOR SHIFT ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY

HINT:
Refer to "INSTRUMENT PANEL-LOWER INSTRUMENT PANEL-REMOVAL" and remove the parking brake hole cover.



3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

HINT:
Refer to "INSTRUMENT PANEL-LOWER INSTRUMENT PANEL-REMOVAL" and remove the upper console panel.



4. REMOVE CONSOLE BOX ASSEMBLY

HINT:
Refer to "INSTRUMENT PANEL-LOWER INSTRUMENT PANEL-REMOVAL" and remove the console box.



5. REMOVE FLOOR SHIFT ASSEMBLY


G037854E01
  1. Disconnect the 2 connectors and clamp.

  1. Move the shift lever to L.

  1. Disconnect the transmission control cable.



    G037855E01
  1. Remove the 4 bolts.

  1. Remove the floor shift.