Home › SUSPENSION & AXLE › SUSPENSION › FRONT STABILIZER BAR

FRONT STABILIZER BAR > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  1. The procedures listed below are for the LH side.



1. REMOVE FRONT WHEEL


2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


C118727
  1. Remove the 2 nuts and stabilizer link.

    HINT:
    If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud in place.



3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:
Use the same procedures described for the LH side.



4. REMOVE FRONT STABILIZER BRACKET


C118728
  1. Remove the 4 bolts and 2 brackets.



5. REMOVE FRONT NO. 1 STABILIZER BAR BUSH
  1. Remove the 2 bushes.



6. REMOVE FRONT STABILIZER BAR
  1. Remove the stabilizer bar front from the vehicle body.