Home › DRIVE LINE › PROPELLER SHAFT › FRONT PROPELLER SHAFT ASSEMBLY (for TSAM Made)

FRONT PROPELLER SHAFT ASSEMBLY (for TSAM Made) > REMOVAL

for Preparation Click here



1. REMOVE FRONT PROPELLER SHAFT ASSEMBLY


    C098708E10
  1. Place matchmarks on the propeller shaft flange and differential flange.
    Text in Illustration 
    *1
    Matchmark

  1. Remove the 4 nuts, 4 bolts and 4 washers and disconnect the propeller shaft.



    C098709E09
  1. Place matchmarks on the propeller shaft flange and transfer flange.
    Text in Illustration 
    *1
    Matchmark

  1. Remove the 4 nuts, 4 washers and front propeller shaft.