FRONT PROPELLER SHAFT ASSEMBLY (for TMMIN Made) > REMOVAL |
| 1. REMOVE NO. 3 ENGINE UNDER COVER (for 1GR-FE) |
| 2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY |
![]() |
Place matchmarks on the propeller shaft flange and differential flange.
| *1 | Matchmark |
Remove the 4 nuts, 4 bolts and 4 washers and disconnect the propeller shaft.
![]() |
Place matchmarks on the propeller shaft flange and transfer flange.
| *1 | Matchmark |
Remove the 4 nuts, 4 washers and front propeller shaft.