Home › SUSPENSION & AXLE › SUSPENSION › FRONT UPPER SUSPENSION ARM

FRONT UPPER SUSPENSION ARM > REASSEMBLY

for Preparation Click here



1. INSTALL FRONT UPPER BALL JOINT


    C237641E01
  1. Using SST and a press in a new upper ball joint.

    SST
    09612-30012  
    09223-00010  

  1. Using a snap ring expander, install a new snap ring.

    NOTICE:
    Make sure the snap ring is securely installed in the groove.



2. INSTALL UPPER BALL JOINT DUST COVER


    C159213E03
  1. Pack the upper arm ball joint with MP grease No. 2.

    Grease capacity:
    8.0 g (0.282 oz.)

  1. Apply MP grease No. 2 to the locations shown in the illustration.

    NOTICE:
    Do not apply MP grease No. 2 to the tapered or threaded parts of the ball joint.

  1. Install a new dust cover to the upper arm.

  1. Install a new dust cover set ring.



3. INSTALL FRONT UPPER ARM BUSH


F050004E01
  1. Using SST and a press, press in a new upper arm bush.

    SST
    09710-30021   (09710-03101)