Home › SUSPENSION & AXLE › SUSPENSION › FRONT LOWER SUSPENSION ARM

FRONT LOWER SUSPENSION ARM > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT NO. 1 LOWER ARM BUSH


F050010E01
  1. Using a hammer and chisel, strike and bend the entire flange of the bush as shown in the illustration.



    F050011E01
  1. Using SST and a press, press out the bush.

    SST
    09632-36010  
    09950-00020  
    09950-60010   (09951-00520)



2. REMOVE FRONT NO. 2 LOWER ARM BUSH


F050010E01
  1. Using a hammer and chisel, strike and bend the entire flange of the bush as shown in the illustration.



    F050012E01
  1. Using SST and a press, press out the bush.

    SST
    09632-36010  
    09950-00020  
    09950-60010   (09951-00400)



3. REMOVE LOWER BALL JOINT ASSEMBLY


    C237854E02
  1. Using 2 screwdrivers and a hammer, remove the snap ring.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the dust cover set ring and dust cover from the lower arm.



    C237855E02
  1. Using SST, remove the ball joint.

    SST
    09950-40011   (09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04031, 09957-04010, 09958-04011)
    09710-22021   (09710-01081)



4. REMOVE FRONT SPRING BUMPER
  1. Remove the front spring bumper from the vehicle.