Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER SWITCH

WIPER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
  1. Attach the claw to install the windshield wiper switch.

    NOTICE:
    Do not push the claw with excessive force as damage may occur.

  1. Connect the connectors.



2. INSTALL STEERING COLUMN LOWER COVER


    C238860
  1. Install the lower cover with the 3 screws.



3. INSTALL STEERING COLUMN UPPER COVER


    C238860
  1. Install the lower cover with the 3 screws.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).