FRONT WIPER MOTOR > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT WIPER ARM HEAD CAP |
![]() |
Using a screwdriver, remove the front wiper arm head cap.
| 4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH |
![]() |
Remove the nut and the front wiper arm and blade assembly LH.
| 5. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH |
![]() |
Remove the nut and the front wiper arm and blade assembly RH.
| 6. REMOVE HOOD TO COWL TOP SEAL |
![]() |
Using a clip remover, detach the 9 clips and remove the hood to cowl top seal.
| 7. REMOVE COWL TOP VENTILATOR LOUVER RH |
![]() |
Remove the clip.
Detach the 5 claws and 5 guides, and remove the cowl top ventilator louver RH in the direction indicated by the arrow in the illustration.
| 8. REMOVE COWL TOP VENTILATOR LOUVER LH |
![]() |
Remove the clip.
Detach the 5 guides, and remove the cowl top ventilator louver LH in the direction indicated by the arrow in the illustration.
| 9. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 2 bolts.
Move the wiper cushion in the direction shown by the arrow in the illustration to detach the wiper cushion from the body, and remove the wiper motor and link.
| 10. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY |
![]() |
Using a screwdriver, disconnect the 2 rods of the wiper link from the wiper motor as shown in the illustration.
![]() |
Using a T30 "TORX" socket, remove the 2 bolts and wiper motor.