CLUTCH RELEASE CYLINDER (for 1GR-FE) > INSTALLATION |
| 1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY |
![]() |
Install the clutch release cylinder with the 2 bolts.
| 2. CONNECT CLUTCH RELEASE CYLINDER TO ACCUMULATOR TUBE |
![]() |
Using a union nut wrench, connect the flexible tube.
Install the 2 way with the bolt.
| 3. CONNECT CLUTCH RELEASE CYLINDER FLEXIBLE TUBE |
![]() |
Using SST, install the flexible tube.
| 4. INSTALL RELEASE CYLINDER HEAT INSULATOR |
![]() |
Install the insulator with the bolt and nut.
| 5. BLEED AIR FROM CLUTCH PIPE LINE |
| 6. CHECK FLUID LEVEL IN RESERVOIR |
| 7. CHECK FOR CLUTCH FLUID LEAKAGE |