Home › TRANSMISSION ยท CLUTCH › CLUTCH RELEASE CYLINDER (for 1GR-FE)

CLUTCH RELEASE CYLINDER (for 1GR-FE) > REMOVAL

for Preparation Click here



1. DRAIN CLUTCH FLUID


2. REMOVE RELEASE CYLINDER HEAT INSULATOR


C112617
  1. Remove the bolt, nut and insulator.



3. DISCONNECT CLUTCH RELEASE CYLINDER FLEXIBLE TUBE


C112615
  1. Using a union nut wrench, remove the flexible tube.

    HINT:
    Use a container to catch the fluid.



4. DISCONNECT CLUTCH RELEASE CYLINDER TO ACCUMULATOR TUBE


    C112616
  1. Using a union nut wrench, disconnect the flexible tube.

    HINT:
    Use a container to catch the fluid.

  1. Remove the bolt and 2 way.



5. REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY


C112662
  1. Remove the 2 bolts and clutch release cylinder.