Home › RESTRAINTS › SEAT BELT › FRONT SEAT OUTER BELT ASSEMBLY

FRONT SEAT OUTER BELT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY


B081493E01

NOTICE:
Do not disassemble the retractor.

  1. Before installing the outer belt, check the ELR.

    1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45° , check that the belt locks.
      If the result is not as specified, replace the outer belt assembly.