Home › BODY ELECTRICAL › METER › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



METER/GAUGE SYSTEM


  1. Auxiliary Fuel Tank Warning Cancel Mode (for 2TR-FBE)

    HINT:
    1. The following item can be customized without using the intelligent tester.
    2. "oFF" indicates that the warning is OFF. "on" indicates that the warning is ON.
    3. When disconnecting the cable from the negative (-) battery terminal, this setting should return to "on".
    4. There are some cases where the driver will leave the auxiliary fuel tank empty intentionally, for example, when only gasoline is used in the main tank or the engine has no cold starting problems even with alcohol in the tank, such as in warm weather. In such cases, the driver may know that the auxiliary fuel tank is empty, and find the warning unnecessary. It is for this reason that cancel mode is provided.


    1. Press the ODO/TRIP switch until the TRIP B meter appears.

    2. Turn the ignition switch off.

    3. Press the ODO/TRIP switch and hold it down.

    4. Turn the ignition switch to ON.

    5. Wait for 10 seconds or more.

    6. Check that the odometer or trip meter displays the current setting "on".



    7. E215049
    8. Press the ODO/TRIP switch.

    9. Check that the odometer or trip meter displays "oFF".

    10. Wait for 5 seconds or more without pressing ODO/TRIP switch to finish this mode.

    11. Turn the ignition switch off.