AIR CONDITIONING UNIT > DISASSEMBLY |
| 1. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY (for Manual Air Conditioning System) |
![]() |
Detach the clamp.
Disconnect the connector.
Remove the screw and air conditioning amplifier assembly.
| *1 | Screw |
| 2. REMOVE AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System) |
![]() |
Detach the 3 claws and remove the air mix damper control cable sub-assembly.
| 3. REMOVE HEATER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System) |
![]() |
Detach the 3 claws and remove the heater control cable sub-assembly.
| 4. REMOVE AIR MIX DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System) |
![]() |
Remove the 3 screws and air mix damper servo sub-assembly.
| 5. REMOVE MODE DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System) |
![]() |
Detach the claw and remove the lever.
| *1 | Lever |
![]() |
Remove the 3 screws and mode damper servo sub-assembly.
| 6. REMOVE QUICK HEATER ASSEMBLY (w/ PTC Heater) |
![]() |
Detach the 2 clamps.
Remove the 2 screws and quick heater assembly.
| 7. REMOVE BLOWER ASSEMBLY |
![]() |
Remove the 3 screws and blower assembly.
| 8. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY |
![]() |
Remove the screw and heater radiator unit sub-assembly.
| 9. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY |
![]() |
Remove the 4 screws.
Detach the 3 claws and remove the lower heater case.
![]() |
Detach the clamp and remove the No. 1 cooler evaporator sub-assembly.
| 10. REMOVE COOLER EXPANSION VALVE |
![]() |
Using a 4 mm socket hexagon wrench, remove the 2 hexagon bolts.
Remove the cooler expansion valve and 2 O-rings from the cooler evaporator.
| 11. REMOVE NO. 1 COOLER THERMISTOR |
Remove the No. 1 cooler thermistor.