Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING UNIT

AIR CONDITIONING UNIT > DISASSEMBLY

for Preparation Click here



1. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY (for Manual Air Conditioning System)


E226174E01
  1. Detach the clamp.

  1. Disconnect the connector.

  1. Remove the screw and air conditioning amplifier assembly.
    Text in Illustration 
    *1
    Screw



2. REMOVE AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)


E226086
  1. Detach the 3 claws and remove the air mix damper control cable sub-assembly.



3. REMOVE HEATER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)


E226087
  1. Detach the 3 claws and remove the heater control cable sub-assembly.



4. REMOVE AIR MIX DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)


E173249
  1. Remove the 3 screws and air mix damper servo sub-assembly.



5. REMOVE MODE DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)


    E225044E01
  1. Detach the claw and remove the lever.
    Text in Illustration 
    *1
    Lever



    E225045
  1. Remove the 3 screws and mode damper servo sub-assembly.



6. REMOVE QUICK HEATER ASSEMBLY (w/ PTC Heater)


    E230796
  1. Detach the 2 clamps.

  1. Remove the 2 screws and quick heater assembly.



7. REMOVE BLOWER ASSEMBLY


E226179
  1. Remove the 3 screws and blower assembly.



8. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY


E173260
  1. Remove the screw and heater radiator unit sub-assembly.



9. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY


E226116
  1. Remove the 4 screws.

  1. Detach the 3 claws and remove the lower heater case.



    E212974
  1. Detach the clamp and remove the No. 1 cooler evaporator sub-assembly.



10. REMOVE COOLER EXPANSION VALVE


    E225050
  1. Using a 4 mm socket hexagon wrench, remove the 2 hexagon bolts.

  1. Remove the cooler expansion valve and 2 O-rings from the cooler evaporator.



11. REMOVE NO. 1 COOLER THERMISTOR
  1. Remove the No. 1 cooler thermistor.