Home › ENGINE ยท 2TR-FBE › STARTING › IGNITION SWITCH

IGNITION SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL IGNITION SWITCH ASSEMBLY
  1. Attach the 2 claws to install the switch to the steering column bracket upper.



2. CONNECT CONNECTOR
  1. Connect the 9 connectors.

  1. Secure the wire harness with the clamps.



3. INSTALL STEERING COLUMN COVER LOWER
  1. Install the steering column cover lower with the 3 screws.

    HINT:
    Turn the steering wheel to the right and left as necessary to install the 3 screws and steering column cover lower.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).