Home › STEERING › POWER STEERING › VANE PUMP (for 1KD-FTV)

VANE PUMP (for 1KD-FTV) > REMOVAL

for Preparation Click here


NOTICE:
  1. When using a vise, do not overtighten it.
  2. When installing the parts indicated by arrows, coat them with power steering fluid (Click here).



1. REMOVE NO. 2 ENGINE UNDER COVER
  1. Remove the 4 bolts and under cover.



2. REMOVE NO. 1 ENGINE UNDER COVER
  1. Remove the 4 bolts and under cover.



3. REMOVE FRONT SIDE MEMBER TO FRONT SUSPENSION CROSSMEMBER BRACE
  1. Remove the 8 bolts and crossmember brace.



4. DRAIN POWER STEERING FLUID


5. DISCONNECT OIL RESERVOIR TO PUMP HOSE


G034430E01
  1. Disengage the clip and disconnect the hose.



6. DISCONNECT PRESSURE FEED TUBE ASSEMBLY


G034431E02
  1. Using a union nut wrench, remove the union bolt and disconnect the pressure feed tube from the vane pump.



7. REMOVE VANE PUMP ASSEMBLY


G034432E01
  1. Remove the 2 nuts and vane pump.

  1. Remove the O-ring.