OIL PUMP > REASSEMBLY |
| 1. INSTALL FRONT OIL PUMP OIL SEAL |
![]() |
Using SST and a hammer, tap in a new front oil pump oil seal.
Coat the lip of the front oil pump oil seal with MP grease.
| 2. FIX FRONT OIL PUMP BODY |
Place the front oil pump body on the torque converter assembly.
| 3. INSTALL FRONT OIL PUMP DRIVEN GEAR |
![]() |
Coat the driven gear with ATF.
Install the driven gear to the front oil pump body.
| 4. INSTALL FRONT OIL PUMP DRIVE GEAR |
![]() |
Coat the drive gear with ATF.
Install the drive gear to the front oil pump body.
| 5. INSTALL STATOR SHAFT ASSEMBLY |
![]() |
Align the bolt holes of the stator shaft with the bolt holes of the front oil pump body and install the stator shaft assembly to the front oil pump body.
Install the 13 bolts.
| 6. INSTALL CLUTCH DRUM OIL SEAL RING |
![]() |
Coat 2 new clutch drum oil seal rings with ATF.
Squeeze the ends of the 2 oil seal rings together with the overlap distance 8.0 mm (0.314 in.) or less, and then install them to the stator shaft groove.
| 7. INSPECT OIL PUMP DRIVE GEAR ROTATION |
![]() |
Check that the drive gear rotates smoothly.
Remove the oil pump from the torque converter.
| 8. INSTALL FRONT OIL PUMP BODY O-RING |
![]() |
Coat a new O-ring with ATF and Install it to the front oil pump body.