Using SST and a dial indicator, measure the direct clutch piston stroke while applying and releasing compressed air (392 kPa (4.0 kgf/cm2, 57 psi)).
- SST
- 09350-30020
(09350-06120)
- Standard piston thickness:
- 0.60 to 1.00 mm (0.024 to 0.039 in.)
If the piston stroke is not as specified, parts may have been assembled incorrectly. Check and reassemble again.
If the piston stroke is still not as specified, select another flange.
- HINT:
- There are 8 different flange thicknesses.
- Standard piston stroke:
No.
| Specified Condition
| No.
| Specified Condition
|
90
| 3.0 mm (0.118 in.)
| 94
| 3.8 mm (0.150 in.)
|
91
| 3.2 mm (0.126 in.)
| 95
| 4.0 mm (0.157 in.)
|
92
| 3.4 mm (0.134 in.)
| 96
| 4.2 mm (0.165 in.)
|
93
| 3.6 mm (0.142 in.)
| 97
| 4.4 mm (0.173 in.)
|