OIL PUMP > REASSEMBLY |
| 1. INSTALL FRONT OIL PUMP OIL SEAL |
![]() |
Using SST and a hammer, tap in a new oil seal.
Coat the lip of the oil seal with MP grease.
| 2. FIX FRONT OIL PUMP BODY SUB-ASSEMBLY |
Place the oil pump body on the torque converter clutch.
| 3. INSTALL FRONT OIL PUMP DRIVEN GEAR |
![]() |
Coat the driven gear with ATF.
Install the driven gear to the oil pump body.
| 4. INSTALL FRONT OIL PUMP DRIVE GEAR |
![]() |
Coat the drive gear with ATF.
Install the drive gear to the oil pump body.
| 5. INSTALL FRONT OIL PUMP BODY O-RING |
![]() |
Install a new O-ring to the oil pump body.
| 6. INSTALL STATOR SHAFT ASSEMBLY |
![]() |
Set the stator shaft on the oil pump body while aligning the bolt holes.
Install the 14 bolts.
| 7. INSTALL CLUTCH DRUM OIL SEAL RING |
![]() |
Coat the 3 oil seal rings with ATF.
Squeeze the ends of the 3 oil seal rings together with an overlap distance of 8 mm (0.314 in.) or less, and then install them to the stator shaft groove.
| 8. INSPECT OIL PUMP DRIVE GEAR ROTATION |
![]() |
Make sure the drive gear rotates smoothly.
| 9. INSTALL FRONT OIL PUMP BODY O-RING |
![]() |
Install a new O-ring to the oil pump.