STARTER (for 2.2 kW Type Bosch Made) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT FENDER SEAL |
Remove the 5 clips and seal.
| 4. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY |
![]() |
Remove the 2 bolts and disconnect the release cylinder.
| 5. REMOVE STARTER ASSEMBLY |
![]() |
Disconnect the starter connector.
Remove the nut and disconnect the starter wire.
![]() |
Remove the 2 bolts and disconnect the ground cable.
Remove the starter.