STARTER (for 2.7 kW Type) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT FENDER SEAL |
Remove the 5 clips and front fender seal.
| 4. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY |
![]() |
Remove the transmission oil level dipstick.
Remove the 2 bolts and oil filler tube.
Remove the O-ring from the oil filler tube.
| 5. REMOVE STARTER ASSEMBLY |
![]() |
Disconnect the starter connector.
Open the terminal cap.
Remove the nut and disconnect the starter wire.
![]() |
Remove the 2 nuts, bolt, ground cable and starter.