STARTER (for 2.0 kW Type) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT FENDER SEAL |
Remove the 5 clips and front fender seal.
| 4. REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY |
![]() |
Remove the 2 bolts and clutch release cylinder.
| 5. REMOVE STARTER ASSEMBLY |
![]() |
Disconnect the starter connector.
Remove the nut and disconnect the starter wire.
![]() |
Remove the nut and bolt, and disconnect the ground cable.
Remove the starter.