Home › ENGINE ยท 1KD-FTV › STARTING › GLOW PLUG (w/o Glow Plug Controller)

GLOW PLUG (w/o Glow Plug Controller) > REMOVAL

for Preparation Click here



1. REMOVE EGR VALVE ASSEMBLY
(Click here)


2. REMOVE NO. 1 GLOW PLUG CONNECTOR
  1. Remove the nut and wire harness.

  1. Remove the 4 screw grommets, 4 nuts and glow plug connector.



3. REMOVE GLOW PLUG ASSEMBLY


A111830
  1. Using a 12 mm deep socket wrench, remove the 4 glow plugs.