Home › ENGINE ยท 1KD-FTV › ENGINE CONTROL SYSTEM › ECM (w/o Glow Plug Controller)

ECM (w/o Glow Plug Controller) > REMOVAL

for Preparation Click here



1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


B278058E01
  1. Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.
    Text in Illustration 
    *1
    Stopper



    B278059E01
  1. Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
    Text in Illustration 
    *1
    Hinge



2. REMOVE TURBO MOTOR DRIVER


A111796
  1. Disconnect the connector.

  1. Remove the bolt and turbo motor driver.



3. REMOVE TRANSMISSION CONTROL ECU ASSEMBLY (for Automatic Transmission)


A111797
  1. Disconnect the 3 connectors.

  1. Remove the 2 bolts and TCM.



4. REMOVE ECM


A111798
  1. Disconnect the 4 connectors.

  1. Remove the bolt, 2 nuts and ECM.



5. REMOVE NO. 1 ECM BRACKET


    A191416
  1. Remove the 3 screws and bracket.



6. REMOVE NO. 2 ECM BRACKET


    A191417
  1. Remove the 2 screws and bracket.