DIESEL THROTTLE BODY > REMOVAL |
| 1. REMOVE NO. 2 AIR CLEANER PIPE SUB-ASSEMBLY |
![]() |
Detach the 4 claws from the pins of the engine cover bracket and remove the No. 1 engine cover sub-assembly.
| *1 | No. 1 Engine Cover Sub-assembly |
| *2 | Claw |
| *3 | Pin |
Remove the 2 bolts and engine cover bracket.
![]() |
Disconnect the manifold absolute pressure sensor connector.
Disconnect the vacuum hose from the gas filter.
Loosen the 2 clamps.
Remove the bolt and disconnect the No. 2 air cleaner pipe sub-assembly together with the 2 air hoses.
| 2. REMOVE DIESEL THROTTLE BODY ASSEMBLY |
![]() |
Disconnect the 2 connectors.
![]() |
Remove the 2 bolts, 2 nuts, diesel throttle body and gasket.