Home › ENGINE ยท 1KD-FTV › ENGINE CONTROL SYSTEM › ACCELERATOR PEDAL ROD

ACCELERATOR PEDAL ROD > REMOVAL

for Preparation Click here



1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY


A098860E01

NOTICE:
  1. Avoid excessive force to the accelerator pedal sensor.
  2. Do not disassemble the accelerator pedal sensor assembly.
  3. This accelerator pedal does not require lubrication.
    Do not apply oil or lubricant to the accelerator pedal sensor assembly.
    If applied, the accelerator pedal sensor assembly must be replaced.

  1. Disconnect the accelerator pedal position sensor connector.

  1. Remove the 2 bolts and accelerator pedal sensor.