Home › ENGINE ยท 1KD-FTV › STARTING › GLOW PLUG (w/o Glow Plug Controller)

GLOW PLUG (w/o Glow Plug Controller) > INSTALLATION

for Preparation Click here



1. INSTALL GLOW PLUG ASSEMBLY


A111830
  1. Using a 12 mm deep socket wrench, install the 4 glow plugs.

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }



2. INSTALL NO. 1 GLOW PLUG CONNECTOR
  1. Install the glow plug connector by uniformly tightening the 4 nuts.

    Torque:
    2.2 N*m{ 22 kgf*cm , 19 in.*lbf }

  1. Install the 4 screw grommets.

  1. Install the wire harness with the nut.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }



3. INSTALL EGR VALVE ASSEMBLY
(Click here)