Home › ENGINE ยท 2KD-FTV › EMISSION CONTROL › EGR VALVE

EGR VALVE > REMOVAL

for Preparation Click here



1. REMOVE DIESEL THROTTLE BODY ASSEMBLY
(Click here)


2. REMOVE ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)


    A212373
  1. Disconnect the connector.

  1. Disconnect the 2 vacuum hoses.

  1. Remove the 2 bolts and electric vacuum regulating valve together with the bracket.

    NOTICE:
    Do not remove the electric vacuum regulating valve from the bracket.



3. REMOVE NO. 2 INTAKE AIR CONNECTOR BRACKET


    A114779
  1. Remove the 3 bolts and No. 2 intake air connector bracket.



4. REMOVE INTAKE AIR CONNECTOR
  1. Remove the 2 nuts, bolt, intake air connector and gasket.



5. REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY


    A272003E01
  1. Remove the 2 bolts, 2 nuts, No. 1 EGR pipe and 2 gaskets.
    Text in Illustration 
    *1
    Gasket



6. REMOVE ELECTRIC EGR CONTROL VALVE ASSEMBLY
  1. Disconnect the EGR valve position sensor connector.

  1. Remove the electric EGR control valve and gasket.