Home › ENGINE ยท 1KD-FTV › EMISSION CONTROL › VACUUM SWITCHING VALVE (w/o Glow Plug Controller)

VACUUM SWITCHING VALVE (w/o Glow Plug Controller) > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A211905E01
  1. Remove the 3 bolts, 2 cap nuts and No. 1 engine cover.



2. REMOVE MANIFOLD STAY WITH VACUUM SWITCHING VALVE (w/ EGR Cooler)


    A147226
  1. Disconnect the 2 connectors.



    A147227
  1. Disconnect the 4 vacuum hoses.



    A147228
  1. Remove the 2 bolts and manifold stay with vacuum switching valve.



3. DISCONNECT NO. 2 VACUUM TRANSMITTING HOSE (w/ EGR Cooler)


4. DISCONNECT NO. 1 VACUUM TRANSMITTING HOSE (w/ EGR Cooler)


5. DISCONNECT NO. 3 VACUUM TRANSMITTING HOSE (w/ EGR Cooler)


6. REMOVE ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (w/o EGR Cooler)


  1. w/ EGR Cooler:



      A211910
    1. Disconnect the connector.



    2. A211911
    3. Disconnect the 4 vacuum hoses.



    4. A211912
    5. Remove the 2 bolts and electric vacuum regulating valve with bracket.

      NOTICE:
      Do not remove the electric vacuum regulating valve from the bracket.



  1. w/o EGR Cooler:



      A250417
    1. Disconnect the 2 connectors.

    2. Disconnect the 3 vacuum hoses.

    3. Remove the 2 bolts and electric vacuum regulating valve together with the bracket.

      NOTICE:
      Do not remove the electric vacuum regulating valve from the bracket.



    4. A112098
    5. Remove the screw and vacuum switching valve.



7. REMOVE VACUUM SWITCHING VALVE (for EGR Cut)


    A258434E01
  1. Remove the screw and vacuum switching valve.



8. REMOVE VACUUM SWITCHING VALVE (for EGR Bypass Valve)


  1. w/ EGR Cooler:



      A151159
    1. Remove the screw and vacuum switching valve.