Home › ENGINE ยท 2TR-FBE › EMISSION CONTROL › AIR PUMP

AIR PUMP > REMOVAL

for Preparation Click here



1. REMOVE AIR CLEANER ASSEMBLY


    A099521E02
  1. Disconnect the mass air flow meter connector.

  1. Detach the wire harness clamp.

  1. Loosen the hose clamp.

  1. Remove the 2 bolts and air cleaner.



2. REMOVE AIR PUMP INLET


    A110280E04
  1. Remove the bolt and air pump inlet.



3. REMOVE NO. 1 AIR INJECTION SYSTEM HOSE
  1. Remove the No. 1 air injection system hose from the air pump inlet pipe.



4. REMOVE NO. 4 AIR INJECTION SYSTEM HOSE
  1. Disconnect the No. 4 air injection system hose from the hose clamp.

  1. Loosen the 2 clamps and remove the No. 4 air injection system hose.



5. REMOVE FRONT FENDER APRON SEAL UPPER
  1. Remove the 6 clips and front fender apron seal upper.



6. REMOVE AIR PUMP ASSEMBLY WITH BRACKET


    A110281E01
  1. Disconnect the air pump connector.

  1. Using a clip remover, detach the 2 claws from the body panel and air pump inlet pipe.



    A099524E02
  1. Disconnect the No. 3 air injection system hose from the air pump inlet pipe.

  1. Disconnect the No. 2 air injection system hose from the air pump inlet pipe.

  1. Remove the 3 bolts and air pump assembly with bracket.



7. REMOVE AIR PUMP INLET PIPE
  1. Remove the bolt and air pump inlet pipe.



8. REMOVE AIR PUMP COVER


    A110282
  1. Using a clip remover, detach the 3 clips and remove the air pump cover.



9. REMOVE NO. 2 AIR INJECTION SYSTEM HOSE


    A110283E03
  1. Detach the clamp from the No. 2 air injection system hose and wire harness.

  1. Detach the clamp from the bracket.

  1. Loosen the clamp and remove the No. 2 air injection system hose from the air pump assembly.



10. REMOVE NO. 3 AIR INJECTION SYSTEM HOSE
  1. Remove the No. 3 air injection system hose from the air pump assembly.



11. REMOVE AIR PUMP ASSEMBLY


    A110284E01
  1. Detach the 3 fittings of the air pump insulators and remove the air pump from the bracket.