Home › ENGINE ยท 2TR-FBE › EMISSION CONTROL › AIR SWITCHING VALVE

AIR SWITCHING VALVE > REMOVAL

for Preparation Click here



1. REMOVE AIR CLEANER ASSEMBLY


    A099521E02
  1. Disconnect the mass air flow meter connector.

  1. Detach the wire harness clamp.

  1. Loosen the hose clamp.

  1. Remove the 2 bolts and air cleaner.



2. DISCONNECT NO. 4 AIR INJECTION SYSTEM HOSE


    A110290
  1. Loosen the clamp and disconnect the No. 4 air injection system hose.



3. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    A253115
  1. Remove the 5 bolts and heat insulator.



4. REMOVE NO. 4 INTAKE PIPE


    A253116
  1. Remove the 4 nuts, No. 4 intake pipe and 2 gaskets.



5. REMOVE AIR SWITCHING VALVE ASSEMBLY


    A253117
  1. Disconnect the air switching valve connector.

  1. Remove the 2 nuts and air switching valve assembly.