Home › ENGINE ยท 1KD-FTV › INTAKE › TURBOCHARGER

TURBOCHARGER > INSPECTION

for Preparation Click here



1. VISUALLY CHECK TURBOCHARGER SUB-ASSEMBLY


    A220776E01
  1. Check for deformation and cracks in the turbine wheel on the exhaust side.
    If the turbine wheel is cracked or deformed, replace the turbocharger sub-assembly.
    Text in Illustration 
    *1
    Turbine Wheel



2. INSPECT AXIAL PLAY OF TURBINE SHAFT


    A110334
  1. Using a dial indicator, insert the needle of the dial indicator into the exhaust side of the turbine shaft.

  1. Move the turbine shaft in an axial direction and measure the axial play of the turbine shaft.

    NOTICE:
    Turbocharger sub-assembly and dial indicators are surely fixed when performing measurement.

    Maximum axial play:
    0.11 mm (0.0043 in.)

    If the axial play is more than the maximum, replace the turbocharger sub-assembly.



3. INSPECT RADIAL PLAY OF TURBINE SHAFT


    A110336
  1. Using a dial indicator, insert the needle of the dial indicator into the oil outlet hole, and set it in the center of the turbine shaft.

  1. Move the turbine shaft in a radial direction and measure the radial play of the turbine shaft.

    Maximum radial play:
    0.112 mm (0.0044 in.)

    If the radial play is more than the maximum, replace the turbocharger sub-assembly.



4. CHECK TURBINE SHAFT ROTATION


    A229649
  1. Rotate the turbine wheel on the exhaust side with your finger and check that it rotates smoothly.

    HINT:
    Even if it takes effort a little to rotate the turbine wheel, this is not a problem.

    If the turbine wheel does not rotate smoothly, replace the turbocharger sub-assembly.