Home › ENGINE ยท 2KD-FTV › INTAKE › TURBOCHARGER

TURBOCHARGER > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE NO. 1 ENGINE UNDER COVER


4. REMOVE NO. 2 ENGINE UNDER COVER


5. REMOVE FRONT EXHAUST PIPE ASSEMBLY
  1. Remove the 2 bolts and 2 compression springs.

  1. Disconnect the front exhaust pipe from the outlet pipe and remove the gasket.

  1. Remove the front exhaust pipe from the pipe support.



6. REMOVE FRONT FENDER UPPER APRON SEAL
  1. Remove the 5 clips and front fender upper apron seal.



7. REMOVE FRONT FENDER SEAL
  1. Remove the 5 clips and front fender seal.



8. REMOVE VENTILATION HOSE HEAT INSULATOR
  1. Remove the 2 bolts and ventilation hose heat insulator.



9. REMOVE VENTILATION HOSE


10. REMOVE AIR CLEANER ASSEMBLY
  1. Disconnect the mass air flow meter connector.

  1. Loosen the hose clamp.

  1. Remove the 2 bolts and air cleaner.



11. REMOVE NO. 2 AIR CLEANER PIPE SUB-ASSEMBLY


    A111789
  1. Disconnect the manifold absolute pressure sensor connector.

  1. Disconnect the vacuum hose from the gas filter.

  1. Loosen the 2 clamps.

  1. Remove the bolt and disconnect the pipe together with the 2 air hoses.



12. REMOVE TURBINE OUTLET ELBOW


A099515E02
  1. Remove the 2 bolts, 4 nuts, outlet elbow (with turbocharger stay) and gasket from the turbocharger.



13. REMOVE TURBOCHARGER SUB-ASSEMBLY


A098783E02
  1. Remove the 2 bolts and manifold stay.

  1. Remove the 2 bolts, union bolt and 2 gaskets.



    A098784E02
  1. Remove the 3 nuts, turbocharger (with turbo oil pipe) and gasket.



    A110356
  1. Remove the 2 nuts, turbo oil pipe and gasket from the turbocharger.