TURBOCHARGER > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE NO. 1 ENGINE UNDER COVER |
| 4. REMOVE NO. 2 ENGINE UNDER COVER |
| 5. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
Remove the 2 bolts and 2 compression springs.
Disconnect the front exhaust pipe from the outlet pipe and remove the gasket.
Remove the front exhaust pipe from the pipe support.
| 6. REMOVE FRONT FENDER UPPER APRON SEAL |
Remove the 5 clips and front fender upper apron seal.
| 7. REMOVE FRONT FENDER SEAL |
Remove the 5 clips and front fender seal.
| 8. REMOVE VENTILATION HOSE HEAT INSULATOR |
Remove the 2 bolts and ventilation hose heat insulator.
| 9. REMOVE VENTILATION HOSE |
| 10. REMOVE AIR CLEANER ASSEMBLY |
Disconnect the mass air flow meter connector.
Loosen the hose clamp.
Remove the 2 bolts and air cleaner.
| 11. REMOVE NO. 2 AIR CLEANER PIPE SUB-ASSEMBLY |
![]() |
Detach the 4 claws from the pins of the engine cover bracket and remove the No. 1 engine cover sub-assembly.
| *1 | No. 1 Engine Cover Sub-assembly |
| *2 | Claw |
| *3 | Pin |
Remove the 2 bolts and engine cover bracket.
![]() |
Disconnect the manifold absolute pressure sensor connector.
Disconnect the vacuum hose from the gas filter.
Loosen the 2 clamps.
Remove the bolt and disconnect the No. 2 air cleaner pipe sub-assembly together with the 2 air hoses.
| 12. REMOVE TURBINE OUTLET ELBOW |
![]() |
Remove the 2 bolts, 4 nuts, outlet elbow (with turbocharger stay) and gasket from the turbocharger.
| 13. REMOVE TURBOCHARGER SUB-ASSEMBLY |
![]() |
Remove the 2 bolts and manifold stay.
Remove the 2 bolts, union bolt and 2 gaskets.
![]() |
Remove the 3 nuts, turbocharger (with turbo oil pipe) and gasket.
![]() |
Remove the 2 nuts, turbo oil pipe and gasket from the turbocharger.