Home › ENGINE ยท 2TR-FBE › COOLING › WATER PUMP

WATER PUMP > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE UNDER COVER


2. DRAIN ENGINE COOLANT
  1. Remove the radiator cap.

    CAUTION:
    Do not remove the radiator cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.



  1. Loosen the cylinder block drain cock plug and radiator drain cock plug to drain the coolant.

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.



    A263383E01



3. DISCONNECT RADIATOR HOSE INLET
  1. Disconnect the radiator hose inlet from the radiator.



4. DISCONNECT RADIATOR HOSE OUTLET
  1. Disconnect the radiator hose outlet from the radiator.



5. DISCONNECT AIR PUMP INLET


    A099954E02
  1. Remove the bolt and disconnect the air pump inlet from the radiator.



6. REMOVE FAN SHROUD


A099963E02
  1. Disconnect the reservoir hose from the radiator.

  1. Loosen the 4 nuts holding the fluid coupling fan.

  1. Remove the drive belt (Click here).

  1. Remove the 2 bolts holding the fan shroud.

  1. Remove the 4 nuts holding the fluid coupling fan, and then remove the fan shroud together with the fluid coupling fan.

    NOTICE:
    Be careful not to damage the radiator core.

  1. Remove the fan pulley from the engine water pump.



7. REMOVE GENERATOR ASSEMBLY
(Click here)


8. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
  1. Remove the engine oil level dipstick.

  1. Remove the bolt and engine oil level dipstick guide.

    HINT:
    Cover the guide hole to prevent foreign matter from entering it.

  1. Remove the O-ring from the engine oil level dipstick guide.



9. REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY


A222362E01
  1. Remove the bolt, pulley and spacer.



10. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY


    A099636E02
  1. Remove the 3 bolts and tensioner.



11. REMOVE ENGINE WATER PUMP ASSEMBLY


A099639E01
  1. Remove the 10 bolts, engine water pump and gasket.