Home › ENGINE ยท 2TR-FE › COOLING › THERMOSTAT

THERMOSTAT > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE NO. 1 ENGINE UNDER COVER
  1. Remove the 4 bolts and cover.



4. DRAIN ENGINE COOLANT
  1. Remove the radiator cap.



  1. Loosen the cylinder block drain cock plug and radiator drain cock plug, and then drain the coolant.

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.



    A112146E01



5. DISCONNECT RADIATOR HOSE OUTLET


6. REMOVE WATER INLET


A099676E01
  1. Remove the power steering pump's connector.



    A120284E01
  1. Remove the 2 nuts, bolt and inlet.



7. REMOVE THERMOSTAT