THERMOSTAT > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
Remove the 4 bolts and under cover.
| 2. DRAIN ENGINE COOLANT |
Remove the radiator cap.
Loosen the 2 cylinder block drain cock plugs and radiator drain cock plug, and then drain the coolant.

| 3. REMOVE V-BANK COVER |
Remove the 2 nuts and cover.
| 4. DISCONNECT RADIATOR HOSE OUTLET |
| 5. REMOVE WATER INLET HOUSING WITH THERMOSTAT |
![]() |
Remove the 3 nuts, water inlet housing with thermostat and gasket.