CYLINDER HEAD > DISASSEMBLY |
| 1. REMOVE INTAKE VALVE |
![]() |
Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
Remove the spring retainer, compression spring, valve and spring seat.
| 2. REMOVE EXHAUST VALVE |
![]() |
Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
Remove the spring retainer, compression spring, valve and spring seat.
| 3. REMOVE INTAKE VALVE STEM OIL SEAL |
![]() |
Using needle-nose pliers, remove the oil seal.
| 4. REMOVE EXHAUST VALVE STEM OIL SEAL |
Using needle-nose pliers, remove the oil seal.
| 5. REMOVE SEMICIRCULAR PLUG |
| 6. REMOVE NO. 1 STRAIGHT SCREW PLUG |
Using a 6 mm hexagon wrench, remove the No. 1 straight screw plugs.
| 7. REMOVE STUD BOLT |
Remove the stud bolts.