Home
›
ENGINE ยท 1GR-FE
›
FUEL
›
FUEL PUMP RESISTOR
FUEL PUMP RESISTOR > INSTALLATION
for Preparation
Click here
1. INSTALL FUEL PUMP RESISTOR
Install the resistor with the bolt.
Torque:
7.5 N*m{ 76 kgf*cm , 66 in.*lbf }
Connect the connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (
Click here
).