Home › ENGINE ยท 1GR-FE › FUEL › FUEL PUMP RESISTOR

FUEL PUMP RESISTOR > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE FUEL PUMP RESISTOR


A111947
  1. Disconnect the connector.

  1. Remove the bolt and resistor.