Home › ENGINE ยท 1KD-FTV › FUEL › FUEL COOLER

FUEL COOLER > INSTALLATION

for Preparation Click here



1. INSTALL FUEL COOLER


A098955E01
  1. 2WD:
    Install the cooler together with the radio earth bracket with the 3 nuts.

    Torque:
    7.5 N*m{ 76.5 kgf*cm , 66 in.*lbf }

  1. 4WD:
    Install the cooler with the 3 nuts.

    Torque:
    7.5 N*m{ 76.5 kgf*cm , 66 in.*lbf }

  1. Connect the 2 fuel hoses.



2. ADD FUEL


3. TIGHTEN FUEL TANK CAP ASSEMBLY


4. BLEED AIR FROM FUEL SYSTEM
  1. w/o Glow Plug Controller:
  2. w/ Glow Plug Controller:


5. CHECK FOR FUEL LEAKS
  1. w/o Glow Plug Controller:
  2. w/ Glow Plug Controller: