Home › ENGINE ยท 1GR-FE › EMISSION CONTROL › AIR FUEL RATIO SENSOR

AIR FUEL RATIO SENSOR > REMOVAL

for Preparation Click here



1. REMOVE V-BANK COVER
  1. Remove the 2 nuts and cover.



2. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)


A112025E02
  1. Disconnect the sensor connector.

  1. Using SST, remove the sensor from the exhaust manifold.

    SST
    09224-00010  



3. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)


A112027E02
  1. Disconnect the sensor connector.

  1. Using SST, remove the sensor from the exhaust manifold.

    SST
    09224-00010