OIL PUMP (w/o Glow Plug Controller) > REPLACEMENT |
| 1. REPLACE ENGINE FRONT OIL SEAL |
![]() |
Using a screwdriver and hammer, tap out the oil seal.
![]() |
Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing gear cover edge.
Apply MP grease to the lip of the oil seal.
| 2. REPLACE SUPPLY PUMP OIL SEAL |
![]() |
![]() |
Using a screwdriver and hammer, tap out the oil seal.
Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing gear cover edge.
Apply MP grease to the lip of the oil seal.