Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT DIMMER SWITCH

HEADLIGHT DIMMER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE SPIRAL CABLE SUB-ASSEMBLY
(Click here)


2. REMOVE WIPER AND WASHER SWITCH ASSEMBLY


    E225945
  1. Disconnect the connectors.

  1. Detach the claw and remove the windshield wiper switch.

    NOTICE:
    Do not push the claw with excessive force as damage may occur.



3. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY


    B088653
  1. Disconnect the connector.



    B088654
  1. Using needle-nose pliers, remove the band clamp as shown in the illustration.



    E177501
  1. While loosening the band clamp as shown in the illustration, detach the claw to remove the headlight dimmer switch assembly.

    NOTICE:
    If the claw is pressed forcefully, it will break.