Home › BODY ELECTRICAL › LIGHTING › HAZARD WARNING SWITCH

HAZARD WARNING SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (for Manual Air Conditioning System)


B113570E01
  1. Install the switch to attach the 2 claws.



2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER
  1. for Manual Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 4 claws to connect the air conditioner control.

    3. Attach the 10 claws and 4 clips to install the center instrument cluster finish panel.

  1. for Automatic Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 8 claws and 4 clips to install the center instrument cluster finish panel.



3. INSTALL FRE/REC CONTROL KNOB (for Manual Air Conditioning System)


E225819
  1. Install the No. 2 heater control knob as shown in the illustration.



4. INSTALL HEATER CONTROL KNOB (for Manual Air Conditioning System)


E225819
  1. Install the No. 2 heater control knob as shown in the illustration.



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


6. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.