Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted

for Preparation Click here


INSPECTION PROCEDURE

HINT:
For vehicles equipped with an Extension Module, refer to optional equipment's manuals.

1.CHECK CELLULAR PHONE
  1. Check if the other caller can hear your voice properly.

    OK:
    Your voice can be heard correctly.



NG
CELLULAR PHONE IS FAULTY
OK


2.CHECK SETTINGS


    E222277E01
  1. Check if the mute is set to on.

    OK:
    Mute is not set to on.

Text in Illustration 
*a
Example


NG
TURN MUTE OFF
OK


3.CHECK MICROPHONE


    E222013
  1. Enter "Microphone & Voice Recognition Check" (Check Mic & Voice Recognition) (Click here).

  1. When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)